Amano Time Guardian Series Spécifications télécharger pdf (Page 71)

FPT-40 Installation & Operation Guide Page 3-7

Figure 3-5 Software Setup for Connection Type

Step 9. In the Connection field, select the type of connection you are

using to communicate with the FPT-40 terminal(s). The

required information in the Connection Info depends on your

connection.

 Ethernet: The FPT-40 terminals communicate to the Host

PC via Ethernet connection. If selected, you must enter the

IP Address and Port 4370

. [Obtain the correct IP address

from your network administrator, or alternatively, please

consult Chapter 3: Network Configuration of this Guide for

additional information about hardware configuration].

Note: The Port number for Ethernet terminals must

be set to;

MTX-15 = 2101, MTX-10 & 20 = 401, FPT-40 = 4370, and

HandPunch’s = 3001.

 Direct: The FPT-40 terminal(s) are directly connected to

the Host PC via Com Port. If selected, you must select the

Com Port and Baud Rate.

Step 10. Click on the Terminals tab to add, edit, delete, or

communicate with FPT-40 terminals.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 91 92

Pas de commentaire

Amano Time Guardian Series Spécifications Page 71